Brake Pad Forming Hydraulic Press Machine 800T
Basic Info
Model No.: Yz32
Product Description
4 Column Hydraulic Press Machine For Brake Pad Forming
This series of hydraulic press is specially designed for the friction material forming. The main machine is of four-column type and frame type. The whole machine adopts finite element analysis method. The structure is optimized and reasonable, the strength is good, the deformation is small, and the machine is more precise and safe. The coefficient is higher. The hydraulic control part adopts the advanced cartridge valve integrated system, which has long service life, simple and compact structure, sensitive and reliable action, convenient maintenance and high generalization degree. The electrical control system adopts the PLC industrial computer controller. Each process action can set and display the relevant time, pressure, exhaust times, etc. on the display screen; and has independent electrical and hydraulic power mechanisms, which can be adjusted, manual and semi-automatic operation. the way.
Mainly used for cold pressing or hot pressing of friction materials, such as automotive clutch plates, brake pads and other similar products.
Parameter
Model unit Yz32-40 Yz32-63 Yz32-100 Yz32-160 Yz32-200 Yz32-250 Yz32-315 Yz32-500 Yz32-630 Yz32-800 Yz32-1000 Yz32-1600 Yz32-2000 Nominal Force KN 400 630 1000 1600 2000 2500 3150 5000 6300 8000 10000 16000 20000 Ejection force KN 63 100 250 250 400 400 630 1000 1000 1250 1250 1600 2000 Max working pressure of liquid Mpa 26 25 25 25 25 25 25 25 25 25 25 25 25 Max. open height mm 400 600 800 900 1000 1000 1250 1400 1500 1500 1500 1600 1800 Slider stroke mm 300 400 600 700 700 700 800 900 900 900 900 900 1000 Ejection stroke mm 140 160 200 250 250 250 300 300 300 350 350 450 450 Slide speed Down mm/s 40 40 100 100 100 120 120 120 120 120 120 150 150 Pressing mm/s 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 8~15 Return mm/s 60 60 80 80 80 80 90 80 80 80 100 120 120 Table size Left-right mm 350 450 600 800 800 800 1200 1400 1600 1600 1800 1800 2000 Front-back mm 350 420 600 700 800 800 1200 1400 1600 1600 1600 1600 2000 Overall dimensions Left-right mm 1200 1300 2000 2200 2200 2200 3300 3500 3700 3700 4000 4200 4500 Front-back mm 700 800 1000 1000 1200 1200 1600 1600 1800 1800 1800 2000 2000 Height mm 1930 2350 3200 3300 3500 3700 4800 5000 5300 5700 5800 6000 6500 Motor power KW 3 5.5 7.5 15 18.5 18.5 22 37 37 44 60 90 134
The types of automotive brake pads are: - brake pads for disc brakes - brake shoes for drum brakes - for large trucks
Brake pads are mainly divided into the following categories: asbestos brake pads (basic elimination), semi-metal brake pads, less metal brake pads, NAO formula brake pads, ceramic brake pads, NAO ceramic brake pads
The working principle of the brake is mainly from friction. Using the friction between the brake pad and the brake disc (drum) and the tire and the ground, the kinetic energy of the vehicle is converted into the heat after the friction, and the car is stopped. A good and efficient brake system must provide stable, adequate, controllable braking force, and good hydraulic transmission and heat dissipation to ensure that the driver's force from the brake pedal can be effectively and efficiently transmitted to the master cylinder. And each sub-pump, and to avoid hydraulic failure and brake degeneration caused by high heat.
Certificate
After-sale
1.Personnel training
Free training for about one week.
2. After-sale service
One year warranty.During warranty period,free maintenance service can be provided.(except man-made faults or damages arising from irresistible natural factors)
3.Installation
Customers need to pay the commission to our proffessional engineer, and travel expense is on foreign customer.(Including round ticket and accommodation cost)
Our company is an ISO 9001 certified Company, and as an approved supplier for the automotive sector, has also received the CE certificates.This demonstrates that the Quality Assurance System has been fully introduced and adopted, in the interests of providing absolute reliability in our products and careful attention to our customers.
FAQ
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as 1-16000Tons Hydraulic Press,SMC/BMC/GMT/DMC/LFT/GRP/FRP Press,Hydraulic Deep Drawing Press,Hydraulic Forging Press,Metalworking/Stamping Press.
3: Where is our factory located? How can I visit there?
A : Our factory is located in Jiaomei City ,Fujian Province,China. You are warmly welcomed to visit us.
4: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
5: How about your delivery time?
A: Generally 90 days. The specific delivery time depends on the items and the quantity of your order. Sometimes we have some in stock.
6: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
7: How do you make our business long-term and good relationship?
A: 1.We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Product Categories : 4 Post Hydraulic Press > Powder Compression Press